Experimental investigation of energy properties for Stigonematales sp. microalgae as potential biofuel feedstock

Microalgae has been considered potential biofuel source from the last decade owing to its versatile perspectives such as excellent capability of CO₂ capture and sequestration, water treatment, prolific growth rate and enormous energy content. Thus, energy research on microalgae is being harnessed to mitigate CO₂ and meet future energy demands. This study investigated the bioenergy potential of native blue-green microalgae consortium as initial energy research on microalgae in Brunei Darussalam. The local species of microalgae were assembled from rainwater drains, the species were identified as Stigonematales sp. and physical properties were characterised. Sundried biomass with moisture content ranging from 6.5% to 7.37% was measured to be used to determine the net and gross calorific value and they were 7.98 MJ/kg-8.57 MJ/kg and 8.70 MJ/kg-9.45 MJ/kg, respectively. Besides that, the hydrogen content, ash content, volatile matter, and bulk density were also experimented and they were 2.56%-3.15%, 43.6%-36.71%, 57–38%-63.29% and 661.2 kg/m³-673.07 kg/m³, respectively. Apart from experimental values, other physical bioenergy parameters were simulated and they were biomass characteristic index 61,822.29 kg/m³-62,341.3 kg/m³, energy density 5.27 GJ/m³-5.76G J/m³ and fuel value index 86.19–88.54. With these experimental results, microalgae manifested itself a potential source of biofuel feedstock for heat and electricity generation, a key tool to bring down the escalated atmospheric greenhouse gases and an alternation for fossil fuel.     

Fabrication of Bi2O3/TiO2 nanocomposites and their applications to the degradation of pollutants in air and water under visible-light

A nanoheterojunction composite photocatalyst Bi2O3/TiO2working under visible-light(λ 420 nm) was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2molar ratio. Maleic acid was employed as an organic binder to unite Bi2O3 and TiO2 nanoparticles. The SEM, TEM, XRD and diffuse reflectance spectra were utilized to characterize the prepared Bi2O3/TiO2nanoheterojunction. The nanocomposite exhibited unusual high photocatalytic activity in decomposing 2-propanol in gas phase and phenol in aqueous phase and, evolution of CO2 under visible light irradiation while the end members exhibited low photocatalytic activity. The composite was optimized to 5 mol% Bi2O3/TiO2. The remarkable high photocatalytic efficiency originates from the unique relative energy band position of Bi2O3 and TiO2 as well as the absorption of visible light by Bi2O3.     

The effect of shredding and test apparatus size on compressibility and strength parameters of degraded municipal solid waste

In many situations, MSW components are processed and shredded before use in laboratory experiments using conventional soil testing apparatus. However, shredding MSW material may affect the target property to be measured. The objective of this study is to contribute to the understanding of the effect of shredding of MSW on the measured compressibility and strength properties. It is hypothesized that measured properties can be correlated to an R-value, the ratio of waste particle size to apparatus size. Results from oedometer tests, conducted on 63.5 mm, 100 mm, 200 mm diameter apparatus, indicated the dependency of the compressibility parameters on R-value. The compressibility parameters are similar for the same R-value even though the apparatus size varies. The results using same apparatus size with variable R-values indicated that shredding of MSW mainly affects initial compression. Creep and biological strain rate of the tested MSW are not significantly affected by R-value. The shear strength is affected by shredding as the light-weight reinforcing materials are shredded into smaller pieces during specimen preparation. For example, the measured friction angles are 32° and 27° for maximum particle sizes of 50 mm and 25 mm, respectively. The larger MSW components in the specimen provide better reinforcing contribution. This conclusion is however dependent on comparing specimen at the same level of degradation since shear strength is also a function of extent of degradation.     

Modeling the spill in the Songhua River after the explosion in the petrochemical plant in Jilin

An explosion in a petrochemical plant in Jilin in the northeast of China on 13 November 2005 was responsible for the discharge of large quantities of benzene and nitrobenzene into Songhua River. This endangered the water supply of Harbin city and influenced the daily life for millions of people. The dispersion-advection equation was solved analytically and numerically and used to simulate the concentration of benzene and nitrobenzene in the Songhua River after the accident. Both solutions gave practically identical results. The main elimination process for both compounds was volatilization. The model results are quite close to the results obtained by measurements at monitoring stations. Arrival time of the pollutant wave, peak concentrations and end of the pollutant wave at Harbin and along the river were predicted successfully. The peak concentrations of nitrobenzene at Harbin were more than 30 times above the permissible limits for drinking water.     

The redox state and activity of superoxide dismutase classes in Arabidopsis thaliana under cadmium or copper stress

The redox state of glutathione and ascorbate as well as the activity of superoxide dismutase classes were determined in leaves of Arabidopsis thaliana grown for seven days in the nutrient solution containing 0, 5 and 50 microM Cd or Cu excess. A decrease in GSH/GSSG ratio was found in plants under Cd and Cu stress. In the plants exposed to Cu stress the activity of all SOD classes increased. However, in the plants treated with Cd the activity of FeSOD and MnSOD was elevated, but CuZnSOD activity was diminished in comparison with control. In these plants the activity of SOD classes was dependent on both the GSH/GSSG and AA/DHA ratios, while in those exposed to Cu excess - on the GSH/GSSG ratio. Differences were shown in the changes both in redox state and activity of SOD classes caused by the metals differing in physiochemical properties. Moreover, relationships between changes in SOD class activities and ROS levels were discussed.     

Different treatment strategies for highly polluted landfill leachate in developing countries

The aim of this research was to determine appropriate treatment technique for effective treatment of heavily polluted landfill leachate. We accomplished several treatment experiments: (i) aerobic biological treatment, (ii) chemical coagulation, (iii) advanced oxidation process (AOP) and (iv) several combined treatment strategies. Efficiency of these treatment procedures were monitored by analysing COD and colour removal. Leachate used for this study was taken from Matuail landfill site at Dhaka city. With extended aeration process which is currently used in Matuail landfill site for leachate treatment, maximum COD and colour removal of 36% and 20%, respectively could be achieved with optimum retention period of 7days. With optimum aluminium sulphate dose of 15,000mg/L and pH value of 7.0, maximum COD and colour removals of 34% and 66%, respectively were observed by using chemical coagulation. With optimum pH of 5.0 and optimum dosages of reagents having H(2)O(2)/Fe(2+) molar ratio of 1.3 the highest removal of COD and colour were found 68% and 87%, respectively with sludge production of 55%. Fenton treatment which is an advanced oxidation process was the most successful between these three separate treatment procedures. Among the combined treatment options performed, extended aeration followed by Fenton method was the most suitable one.     

Spatial Prediction of Stream Temperatures Using Top-Kriging with an External Drift

Top-kriging is a method for estimating stream flow and stream flow-related variables on a river network. Top-kriging treats these variables as emerging from a two-dimensional spatially continuous process in the landscape. The top-kriging weights are estimated by a family of variogram models (regularisations) for different catchment areas (kriging support), which accounts for the different scales and the nested nature of the catchments. This assures that kriging weights are distributed to both hydrologically connected and unconnected sites of the stream network according to the data situation: top-kriging gives most weight to close-by sites at the same river system, but when the next hydrologically connected site is far away, more weight is given to a close-by site at an adjacent river system. The distribution of weights is in contrast to ordinary kriging and stream distance-based kriging which does not account for both spatial proximity and network connectivity. We extend the top-kriging method by incorporating an external drift function to account for the deterministic patterns of the spatial variable. We test the method for a comprehensive Austrian stream temperature dataset. The drift is modelled by exponential regression with catchment altitude. Top-kriging is then applied to the regression residuals. The variogram used in top-kriging is fitted by a semiautomatic optimisation procedure. A leave-one-out cross-validation analysis shows that the model performs well for the study domain. The residual mean squared error (cross-validation) decreases by 20 % when using top-kriging in addition to the regression model. For regions where the observed stream temperatures deviate from the expected value of the drift model, top-kriging corrects these regional biases. By exploiting the topological information of the stream network, top-kriging is able to improve the local adjustment of the drift model for the main streams and the tributaries.     

A biophysically anchored production function

The first part presents a conceptual model of the economic system in its ecological and social context. It is developed via an integration of basic concepts in physical resource theory, animal and human physiology, economic theory and systems ecology. The capacity of the model to support analysis of such complex systems where life is a key system characteristic is high. The conceptual model shows the dependency of the human economy on support by non-renewable and renewable resources from Nature (i.e. ecological source restrictions), as well as the capacity of ecosystems to assimilate wastes (ecological sink restrictions). The analysis focuses general principles; thus, the high level of abstraction results in an apparent simplicity. In the second part, we integrate traditional economic production functions and the conceptual model, which results in the formulation of a biophysically anchored production function (BAPF). The BAPF by itself, and through the system of ecological economic accounts that can be derived from it, represent a toolbox that supports the operationalisation of a sustainable development from micro to macro level. It is coherent with Impredicative Loop Analysis, existing management systems within agricultural sciences, OECD’s principles for sustainable development and the approach of Millennium Ecosystem Assessment. Compared to analytical approaches used in the formulation of sustainability policies in the private and public sphere, based on conceptual models ignoring the complexity when life (bios) is a defining system characteristic, its relevance for the operationalisation of sustainable development approaches infinity. The third part presents results from statistical analysis of relations between gross domestic product and energy supply and some emissions, respectively, for different nations and time periods, delivering values on levels and trends for parameters in the BAPF as well as a first test of the relevance of the BAPF proposed. The paper is ended by a theoretical analysis of the costs of provoking an economic system working under ecological source and sink restrictions to follow exponential growth: The need to decouple economic growth from natural resource use and emissions is highlighted. Otherwise, the erosion of the ecological foundation of the economy with regard to source as well as sink aspects will be a function of exponential growth.